NRF24L01 2.4GHz Wireless Transceiver Module

Description

This module based on Nordic nRF24L01, a highly integrated, ultra-low-power 2Mbps RF transceiver for the 2.4GHz ISM band. Nordic nRF24L01+ integrates a complete 2.4GHz RF transceiver, RF synthesizer, and baseband logic including the Enhanced ShockBurst™ hardware protocol accelerator supporting a high-speed SPI interface for the application controller.

The nRF24L01 is configured and operated through a Serial Peripheral Interface (SPI.) Through this interface the register map is available. The register map contains all configuration registers in the nRF24L01 and is accessible in all operation modes of the chip. 

Enhanced ShockBurst™ reduces system cost by handling all the high-speed link-layer operations. The radio front end uses GFSK modulation. It has user-configurable parameters like frequency channel, output power, and air data rate.

Features:

Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability,

NRF24L01 is a universal ISM band monolithic transceiver chip works in the 2.4-2.5GHz

Particularly suitable for industrial control applications.

Built-in hardware CRC error detection, Multipoint communication address control.

Built-in voltage regulator

Built-in 2.4Ghz antenna

125 Channels, Multi-point communication, and frequency hopping to meet the communication needs

Low-power 1.9 ~ 3.6V, only 1uA on Power-down mode

NRF24L01 SPI interface: hardware SPI port, MCU I/O ports

Internal FIFO compatible with a variety of microprocessor interface, micro-controller is convenient   

Available software to set the address only received local Address when output data(Provide interrupt instruction), can be directly connected to a variety of microcontrollers, Software programming is very convenient.

Standard DIP Pitch Interface for embedded applications.

Package Content:

1 x NRF24L01 2.4GHz Wireless Transceiver Module